Hi experts,
I'm upgrading to EHP7.
I encountered XPRA error during the subjected phase, with errors such as below.
3 ECD832 TCDRP: OBJ '"XBRL_GCD"' REPORT '"XBRL_GCD"' created
3 ECD834 TCDRS: REP '"XBRL_GCD"' TABN '"VFAGL_GCDPC_VER"' created
3 ECD834 TCDRS: REP '"XBRL_GCD"' TABN '"VFAGL_GCDVC_VER"' created
3 ECD834 TCDRS: REP '"XBRL_GCD"' TABN '"VFAGL_GCDVC_VERS"' created
3 ECD102 "R3TR" "CHDO" "XBRL_GCD" was imported
3EECD122 "CHDO_2" Error, RFC receiver "SYSTEM_FAILURE SAVE" " "
3 ECD830 INCLUDE '"FREIT_RETCCDT"' created
3 ECD830 INCLUDE '"FREIT_RETCCDF"' created
3 ECD830 INCLUDE '"FREIT_RETCCDV"' created
3 ECD832 TCDRP: OBJ '"REIT_RETC"' REPORT '"REIT_RETC"' created
3 ECD102 "R3TR" "CHDO" "REIT_RETC" was imported
3EECD122 "CHDO_GEN_RFC" Error, RFC receiver "SYSTEM FAILURE" " "
3EECD101 "HR_IT5142" " " " " was not imported
3EECD101 "HR_IT5143" " " " " was not imported
3EECD101 "HR_IT5144" " " " " was not imported
3EECD101 "HR_IT5145" " " " " was not imported
3EECD101 "HR_IT5151" " " " " was not imported
3EECD101 "HR_IT5152" " " " " was not imported
3EECD101 "ISU_EANL" " " " " was not imported
3EECD101 "ISU_ELPASS" " " " " was not imported
3EECD101 "ISU_ESETTLUNIT" " " " " was not imported
3EECD101 "ISU_EUFASS" " " " " was not imported
3EECD101 "ISU_TOUEXCEPT" " " " " was not imported
3EECD101 "ISU_TOUEXRESP" " " " " was not imported
3EECD101 "KCONS" " " " " was not imported
3EECD101 "LOP_DOC" " " " " was not imported
3EECD101 "LOP_MASTER" " " " " was not imported
3EECD101 "LOP_REF" " " " " was not imported
3EECD101 "MKK_BELEG" " " " " was not imported
3EECD101 "MKK_MA" " " " " was not imported
3EECD101 "MKK_VT" " " " " was not imported
3EECD101 "NAPX" " " " " was not imported
3EECD101 "NBRKP" " " " " was not imported
3EECD101 "NOTAFISCAL" " " " " was not imported
3EECD101 "OIUX8_NM_AFFOVR" " " " " was not imported
3EECD101 "OIUX8_NM_ASU" " " " " was not imported
3EECD101 "OIUX8_NM_ASUE" " " " " was not imported
3EECD101 "OIUX8_NM_JC_MST" " " " " was not imported
3EECD101 "OIUX8_NM_MASTER" " " " " was not imported
3EECD101 "OIUX8_NM_SOL" " " " " was not imported
3EECD101 "OIUX8_NM_SOLE" " " " " was not imported
3EECD101 "OIUX8_NM_SUFXRF" " " " " was not imported
2EEPU133 Errors occurred during post-handling "AFTER_IMP_CHDO" for "CHDO" "L"
3 EPU135 "AFTER_IMP_CHDO" belongs to package "SZD"
2EEPU136 The errors affect the following components:
2EEPU137 "BC-SRV-ASF-CHD" ("Change Documents")
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
Another observation is from the system log, where it indicates "Table /ITS/DI_BC does not exist in the database with ID R/3". I checked in other system of same landscape where this table doesn't exist as well, but such error doesn't occur.
I've gone through note 1764234 and 1805757, but it doesn't seem to help. Also, my current BASIS COMPONENT is 740, 0002.
Is it safe to ignore this, and accept non-severe errors in this phase?
How do I confirm and validate that there's indeed an enhancement made, and what enhancement was made?
Thanks.