We are in a process of EHP 6 upgrade  on WIN2008 and got stuck in the execution. We are getting the following message in SUM (10SP07):

Checks after phase MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/SUBMOD_CRR_LAST_CHTRANS/RUN_CRR_LAST were negative!

The error we find in the logs is - No tasks exist for transition "LAST_TRANSFER" and scenario "ISU".

We have followd note 167856 which describes this issue, however we are not able to start and stop the transfer as mentioned inthe note.

In transaction crr_control the status is " The replication of recordedchanges is not enabled".

When we try to start the transfer wee see a message on the bottom of the screen "transfer of changes is not enabled". and In the log section there is the message "No tasks exist for transition LAST_TRANSFER and scenario ISU".

We tried stopping and starting the shadow instance and reexecuting the phase in SUM but it continues to fail.

How and when does SUM tool recognize corrupted or partially downloaded SAR files during an upgrade?

How to properly install Crystal Reports for VS 2013. SAP web site says to use Executable Installer. Which one?

Marek

Hello All,

I have installed a new SAP EHP6 installation.

I have verified i have HTTP service active in SMICM.

when i open soamanger t code i am getting the below error in the browser

500 SAP Internal Server Error

ERROR: Secure Storage: Entry was created with another SID (termination: ERROR_MESSAGE_STATE)

To test service from sicf  node /sap/bc/webdynpro/sap/appl_soap_management  When i test the service i am able to open soamanger in a browser.

Please help me in solving this issue, i am able to open SECSTORE t code but this is an new installed system i dont have any migrated objects.

Please help me in moving forward.

Thanks in advance

Vardahn.

HI

Has anyone any likely date  when EHP 8 will be released for  ERP.

Cheers

Peter

Hi

We upgrade version of sap from  SP HR SAPKE60480 .

When we check

• the specific package, we have  an error as  " the object does not exist" for a specific include for example
• the standard package as PTIM
  • we have for example an error for a new standard program

Had you already this type of problem? We have no blocking error.

Thanks in advance for your answer.

Regards

L.Dandois

Dears,

I have the following problem in the SUM 1.13 Step 5.3 „Configuration“ Database System User Password is not accepted

Password tested and checked settings several times !

password works

JDK version........: 1.6.0_95

SUM version........: 1.0.13.0

LOG /SUM/sdt/log/SWITCH/SHOW-DB-SYSTEM-DIALOG_04.LOG

May 4, 2015 12:01:31 PM [Info  ]: The database system user name is: SYSTEM.

May 4, 2015 12:01:31 PM [Info  ]: Dialog eliminator dbSystemPasswordEliminator does not allow to omit dialog DBSystemPassword

May 4, 2015 12:01:39 PM [Info  ]: Validatable parameter DB_SYS_PASS has been validated by validator RequiredFields.

May 4, 2015 12:01:39 PM [Info  ]: Executing command dbinfo.

May 4, 2015 12:01:49 PM [Info  ]: Could not execute command dbinfo.

May 4, 2015 12:01:51 PM [Info  ]: Dialog eliminator dbSystemPasswordEliminator does not allow to omit dialog DBSystemPassword

Thanks for thesupport

bestregards

Stefan

Hi

I'm looking for a comparison between EHP 4 - EHP 7. We use to do this from Solution Browser but its no more there, any help or suggations on this.

Regards

Asim

I install EHP7.

Current system ERP 6.0 (SLES 10, Oracle 11.2.0.4, Kernel 721) without addon WEBCUIF

Target system ERP 6.0 EHP 7

I generated XML file in MOPZ and have next files in download directory:

K-731AHINWEBCUIF.SAR  K-74704INWEBCUIF.SAR  K-74708INWEBCUIF.SAR

K-74701INWEBCUIF.SAR  K-74705INWEBCUIF.SAR  K-74709INWEBCUIF.SAR

K-74702INWEBCUIF.SAR  K-74706INWEBCUIF.SAR  K-747BHINWEBCUIF.SAR

K-74703INWEBCUIF.SAR  K-74707INWEBCUIF.SAR  WEBCUIF731.SAR

SUM was stopped in phase ADDONQCALC with message

2 ETQ399 Table ET_MISSING_PATCHES (#1):

3 ETQ399 "???","WEBCUIF","746",""

2EETQ142 Addon queue calculation failed, rc = "1", reason = "There are upgrades to required software component versions missing"

4 ETQ399 (trc) R3upNcversWriteToFile: NCVERS file NCVERSTEMP.DMP written (rc=0)

4 ETQ399 Addon queue state changed from 'INITIAL' to 'ERROR'.

4 ETQ010 Date & Time: 20150725090754

1EETQ399 Last error code set is: Queue calculation failed since ADDons are missing

In this log have installation file SAPK-731AHINWEBCUIF and upgrade file SAPK-747BHINWEBCUIF with SP

Hello all.

We are installing EHP4 on a SAP ERP 6.0 using EHPI and got the following error on the MAIN_SHDIMP/SHADOW_IMPORT_INC phase:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SHADOW IMPORT ERRORS and RETURN CODE in SAPKE60416.ERP

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2EETW165 Function "HR_PL_D_DE_HRPAYDE_ST (31DE|76)" does not fit into the existing function group "(3101|58)".

In other threads I have read that we have to check if this package is in the same request order as another version of the same package. If so, we can choose in SPAM: Extras -> Ignore test import errors

Our Shadow instance is now stopped by the installation (grey, with a forbidden sign on it).

Should we start Shadow instance for doing this checkings on it?

Thank you ver much !

Emilio Leite

Hi everyone,

Note that this is my first time dealing with SAP, so this might all (hopefully) be due to a beginner mistake.

I am currently trying to install SAP SUM onto a MS 2008 Server running the Java Netweaver, in order to install SAP GRC.

However, during the SUM setup, I get an error during the credentials step:

The update tool was unable to connect to the SAPControl web service on any of the detected instance numbers. Check that the SAP Start Services are running for all instances in the cluster. See SAP Note 1401712 for further information. The update tool is unable to detect the instances information for instance number: 0 on host: null via the SAPCONTROL web service API. Either the SAP Start Service associated with this instance is not running or a required functionality is not supported by the current version of the Kernel. See SAP Note 1401712 for further information. Sapcontrol client could not perform action get instance properties on instance 0 Return code condition success evaluated to false for process sapcontrol for action get instance properties.

Note that all instances are up and running (according to SAP Management Console) and I have tried to resolve the issue via SAP Note 1873918 [0], as it was mentioned to have solved the problem in other discussions.

Can anyone help out here?

Best,

Julian

[0]  https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138373339313826

Upgrading SAP ECC 6.0 Ehp4 IDES to EHp5.

Stuck in EHPi during configuration phase:

PREP_EXTENSION/SUB_MODEXTENSION_NEW/IS_SELECT

During "Add on selection", If i dont choose any thing I am presented

with the following message:

////////////

For the following Add-on component(s) the KEEP YOURS decision is not

longer valid,

since at least for one of the base components an Add-on upgrade has

been included:

C-CEE (changed base component: SAP_BASIS)

OTEXVIM (changed base component: SAP_BASIS)

TDAGBCA (changed base component: SAP_BASIS)

You need to change the decision of the above Add-on(s).

//////////////

When I choose continue I am returned to the Add on selection screen,

and the three Add ons mentioned above are auto selected.

When I choose Continue I can choose between keeping the Add on at the

current version or providing a SAINT package.

I want to keep all three packages at the current version because I am

unable to find newer versions of those packages.

I found note:1262124 "Vendor Keys for Add-ons released with ERP

Enhancemnt Packages", However- when I provide the vendor key for the

relevant package and hit "Continue", nothing happens, regardless of

what I put in the VEndor Key field.

I have also searched for newer version of the 3 components, but could find no update. Current versions are:

C-CEE  110_604 patch level 000

OTEXVIM  516_700 patch level 002

TDAGBCA 110_600 patch level 002

Can anyone advise on how to proceeed?

Kind Regards

Adam

I want to upgrade my system to ehp 6.

This is my current level of ehp. As i am a beginner, please help me how to proceed.

Thanks in advance.

Dear All,

We are trying to upgrade the Patches from  SP2 to SP9 using sum tool of PI server , But in the reprocessing step we are getting the below error .

We have tried with a full restart , kernal upgrade in sum directory , run cleanipc with main instance down ,but still no luck to start the shadow system.

I am attaching the logs to analyze ,please help us to resolve the issue.

Regards

RK

I

Hi experts,

after upgrade to EHP7 SP08 there are some missing views in a database

CDS_DS_CCS_PAR

ESJIFIDUNAREA

ESJIFIDUNAREATXT

ESJISDCUSTTXCLS

V_FEB_FUZZY

I cannot find them in ADT

Where can I get the missing DDL to implement them to own database?

Regards, Yevgeniy Seleznev

Hi Experts ,

Currently performing EHP7 upgrade I have faced error during the configuration phase , below attached was the error screenshot .

error logs shows the below :

Executing module 'PREP_INSTALL'.

Execution of PREPARE module "Installation" begins at 20140302202456

# Starting phase execution with maxpar = 6, scheduled: 14x'-'

CURRENTPHASE PREP_INSTALL/SHDINST_OS
...started at 20140302202456
# Using phase log file 'SHDINST_OS.LOG'.
..finished at 20140302202457 with status ABORTED.
# Error message set: 'Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details'

.begin dialog at 20140302202459

SHDINST_OS log :

1 ETQ399 Possibly the password for user ISNET\SAPServiceDEC entered in phase

1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.

1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:

1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r

1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01

1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm

1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.

1EETQ399 Last error code set is: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details

1EETQ204 Upgrade phase "SHDINST_OS" aborted with severe errors ("20140302202457")

Kindly advice to fix

How do you create a transport in order to transport the activation of a component to the next system in the landscape?

In my sandbox system whenever I activate a component no transport is created. I have manually created a transport using system setting --> transport and then triggered the activation. The transport is not updated with anything.

Dear Team ,

When I am upgrading Ehp7 in ECC6.0 . Its give below error.

When I check log .

Dec 11, 2014 7:58:18 PM [Warning]: Archive /usr/sap/trans/ehp7/SAPEXEDB_100-10012386.SAR for DB ORA skipped as

DB MAX is expected.

Dec 11, 2014 7:58:18 PM [Warning]: Kernel archive /usr/sap/trans/ehp7/SAPEXEDB_100-10012386.SAR is skipped as

the second archive is missing in the stack.

Dec 11, 2014 7:58:18 PM [Warning]: Archive /usr/sap/trans/ehp7/SAPEXEDB_100-10012462.SAR for DB ORA skipped as

DB MAX is expected.

Dec 11, 2014 7:58:18 PM [Warning]: Kernel archive /usr/sap/trans/ehp7/SAPEXEDB_100-10012462.SAR is skipped as

the second archive is missing in the stack.

Please find the attach log file also and suggest .

Hi all,

I am doing  an upgrade from ehp5 ready to ehp6 and I am in the execution phase. I am getting the error below, i notice all the sap services are up. I was thinking of stopping them and retrying from the point it stopped, would there be any harm. I don't want to mess up the intallation, I have come too far.

This trouble ticket was created by SAPup on 20120613100019

-------------------------------------------------------------

SAPup broke during phase KX_SWITCH in module MAIN_SWITCH / Downtime I: Switch tables and Kernel

Error Message: Deleting 'E:\usr\sap\PRD\DVEBMGS30\exe\sapstartsrv.exe' failed: Access is denied.

-------------------------------------------------------------

-------------------------------------------------------------

Summary of SAPup:

-------------------------------------------------------------

SAPehpi Release:    lmt_005

SAPehpi Version:    SAPup release lmt_005 version 49.004

Start Release:        702

Target Release:        731

-------------------------------------------------------------

Summary of host system details:

-------------------------------------------------------------

SID:            PRD

Host:            ERPPRD

MS Host:        ERPPRD

GW Host:        ERPPRD

Start Path:        E:\usr\sap\PRD\DVEBMGS30\exe   

Kernel Path:        E:\usr\sap\PRD\DVEBMGS30\exe

-------------------------------------------------------------

Summary of operating system details:

-------------------------------------------------------------

OS Type:        Windows NT X86_64

OS Version:        6.1

-------------------------------------------------------------

Summary of database details:

-------------------------------------------------------------

Database Type:        ora

Database Version:    11.2.0.2.0

-------------------------------------------------------------

Summary of RFC details:

-------------------------------------------------------------

Host:            ERPPRD

GW Host:        ERPPRD

Client:            000

Destination:        PRD

Language:        E

System No.:        30

-------------------------------------------------------------

-------------------------------------------------------------

Hello,

i have a problem with EHP7 Installation. On two systems i have already successfully installed EHP7 (from EHP6 for ERP 6.0 / EHP3 for Netweaver 7.0), but now on the third i get the following issue:

SUM says:

Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!

Last error code set: Process /usr/sap/R3Q/DVEBMGS01/exe/sapcontrol exited with 2, see '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO' for details

System start failed

Phases Log said, message server not running, dev disp said kernel incompatible...? At the moment, kernel isn´t switched yet, the directory ist /sapmnt/SID/exe, not ....exe/uc/.... i´m confused, please help... where can i start to solve my issue...?

Thanks!!!

PHASES.LOG from SUM directory:

1 ETQ201 Entering upgrade-phase "MAIN_SWITCH/STARTSAP_TRANS" ("20150912175915")

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'

4 ETQ399 Environment variables:

4 ETQ399   dbs_db6_schema=SAPSR3

1 ETQ200 Executing actual phase 'MAIN_SWITCH/STARTSAP_TRANS'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'START_SERVICE;CENTRAL'

2 ETQ399 Arg[1] = 'DEVTRACE.LOG'

1 ETQ399 No dual stack setup, phase option acceptJavaFail without impact.

1 ETQ399 Read 1 modification commands from '/globalR3Q/usrsapR3Q/SUM/abap/bin/ALPALL.XML'.

1 ETQ399 Modifying '/globalR3Q/usrsapR3Q/SUM/abap/sapnames/R3Q_DVEBMGS01_sapr3q.BCK.STARTSAP_TRANS', writing to '/usr/sap/R3Q/SYS/profile/R3Q_DVEBMGS01_sapr3q'.

1 ETQ399 Insert/Modify/Add 0/0/0 lines.

1 ETQ399 SYSTEM MANAGER: Initializing.

1 ETQ399 SYSTEM MANAGER: STARTSAP on UNIX.

1 ETQ399 SYSTEM MANAGER: STARTSAP with SAPCONTROL.

1 ETQ399 SYSTEM MANAGER: PRESTARTACTION on UNIX.

1 ETQ399 SYSTEM MANAGER: Starting the service.

1 ETQ399 SYSTEM MANAGER: StartService on Unix.

1 ETQ399 SYSTEM MANAGER: Starting service.

1 ETQ399 SAPCONTROL MANAGER: startService

1 ETQ399 SAPCONTROL MANAGER: preStartServiceAction on UNIX

1 ETQ399 SAPCONTROL MANAGER: preStartServiceAction using start path: /usr/sap/R3Q/DVEBMGS01/exe and start profile : /usr/sap/R3Q/SYS/profile/START_DVEBMGS01_sapr3q

1 ETQ399 SAPCONTROL MANAGER: preStartServiceAction using ouput file: /globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO

3 ETQ120 20150912175915: PID 18022534 execute '/usr/sap/R3Q/DVEBMGS01/exe/sapstartsrv pf=/usr/sap/R3Q/SYS/profile/START_DVEBMGS01_sapr3q -D', output written to '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO'.

3 ETQ122 20150912175916: PID 18022534 exited with status 0 (time: 1.000/0.017/0.045 real/usr/sys)

1 ETQ399 SAPCONTROL MANAGER: preStartServiceAction using kernel exe release: 742 and kernel state: 0

1 ETQ399 SYSTEM MANAGER: SAPControl tries to control CENTRAL INSTANCE

1 ETQ399 SYSTEM MANAGER: ControlInstance with SAPCONTOL action START for instance 01.

1 ETQ399 SYSTEM HEALTH MANAGER: running preCheck for instance 01 on host sapr3q.

2 ETQ399 SYSTEM HEALTH MANAGER: Checking instance number 1 for used ports on host 'sapr3q'.

3 ETQ399 SYSTEM HEALTH MANAGER: Port 3201 appears to be unused.

3 ETQ399 SYSTEM HEALTH MANAGER: Port 3301 appears to be unused.

3 ETQ399 SYSTEM HEALTH MANAGER: Port 3601 appears to be unused.

3 ETQ399 SYSTEM HEALTH MANAGER: Port 3901 appears to be used.

1 ETQ399 SYSTEM HEALTH MANAGER: call test rfc.

1 ETQ359 RFC Login to: System="R3Q", AsHost="sapr3q" Nr="01", GwHost="sapr3q", GwService="sapgw01"

2EETQ231 RFC Login failed

1 ETQ399 SYSTEM HEALTH MANAGER: check for instance processlist.

1 ETQ399 SAPCONTROL MANAGER: getProcessList with host: sapr3q and instance: 01

3 ETQ120 20150912175946: PID 18022552 execute '/usr/sap/R3Q/DVEBMGS01/exe/sapcontrol -format script -prot NI_HTTP -host sapr3q -nr 01 -function GetProcessList', output written to '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO'.

3 ETQ122 20150912175946: PID 18022552 exited with status 0 (time: 0.000/0.018/0.043 real/usr/sys)

1 ETQ399 SYSTEM HEALTH MANAGER: System is down, go on with start action

1 ETQ399 SAPCONTROL MANAGER: startWait with host: sapr3q and instance: 01

3 ETQ120 20150912175946: PID 18022554 execute '/usr/sap/R3Q/DVEBMGS01/exe/sapcontrol -prot NI_HTTP -host sapr3q -nr 01 -function StartWait 300 10', output written to '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO'.

3 ETQ122 20150912175957: PID 18022554 exited with status 2 (time: 11.000/0.018/0.043 real/usr/sys)

1 ETQ399 SYSTEM MANAGER: SAPControl action START failed for instance 01 ('SAPCONTROL MANAGER: call (sapcontrol) failed with return code '-1'

').

1 ETQ399 SYSTEM MANAGER: CheckSystemStatus.

1 ETQ399 SAPCONTROL MANAGER: getProcessList with host: sapr3q and instance: 01

3 ETQ120 20150912175957: PID 18022556 execute '/usr/sap/R3Q/DVEBMGS01/exe/sapcontrol -format script -prot NI_HTTP -host sapr3q -nr 01 -function GetProcessList', output written to '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO'.

3 ETQ122 20150912175957: PID 18022556 exited with status 0 (time: 0.000/0.018/0.043 real/usr/sys)

1EETQ399 SYSTEM MANAGER: START of mandatory instance 01 on server sapr3q has failed

2EETQ354 Starting system failed, rc="-1"

4 ETQ010 Date & Time: 20150912175957

1EETQ399 Last error code set is: Process /usr/sap/R3Q/DVEBMGS01/exe/sapcontrol exited with 2, see '/globalR3Q/usrsapR3Q/SUM/abap/log/SAPup.ECO' for details

System start failed

1EETQ203 Upgrade phase "STARTSAP_TRANS" aborted with errors ("20150912175957")

root@aixsap14:/usr/sap/R3Q/SUM/abap/log #

and /usr/sap/R3Q/DVEBMGS01/work/dev_disp

Sat Sep 12 18:42:03 2015

WLM Tag 'R3Q/DSP' successfully set for this process

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1709]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2833]

*****************************************************************************

*

*  LOCATION    SAP-Dispatcher sapr3q_R3Q_01 on host aixsap14

*  ERROR       The connection to the specified message server

*              (sapr3q / 3901) failed. Please check the trace file

*              of the message server. If a network filter has

*              been activated (see message server parameters

*              ms/acl_file_...) please check the configuration

*

*  TIME        Sat Sep 12 18:42:03 2015

*  RELEASE     721

*  COMPONENT   MS (message handling interface)

*  VERSION     4

*  RC          -35

*  MODULE      msxxi.c

*  LINE        2861

*  COUNTER     8

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1867]

***LOG Q1K=> MsIAttachEx: StoC check failed, Kernel not compatible with system (rc=-100) [msxxi.c      820]

*** ERROR => Kernel incompatible to already connected instances (see dev_ms for details) [dpxxdisp.c   12889]

DpHalt: shutdown server >sapr3q_R3Q_01                           < (normal)

DpHalt: stop work processes

Sat Sep 12 18:42:07 2015

DpHalt: stop gateway

DpHalt: terminate gui connections

DpHalt: wait for end of work processes

DpHalt: waiting for termination of work processes ...

Sat Sep 12 18:42:09 2015

DpHalt: wait for end of gateway

DpHalt: not attached to the message server

DpHalt: cleanup EM

DpHalt: cleanup event management

DpHalt: cleanup shared memory/semaphores

DpCleanupSharedResources: removing request queue

***LOG Q05=> DpHalt, DpHalt ( 6946860) [dpxxdisp.c   11876]

DpHalt: *** shutdown completed - server stopped ***

root@aixsap14:/usr/sap/R3Q/DVEBMGS01/work #