Dear All,
When we are doing an upgrade from Solman 7.0 to 7.1 facing, below issue
few days back we have done copy of production machine into clone machine and performing upgrade on clone machine ..
Please find below error image .
Thanks,
Rahul yedapally
Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.
PE0353ERROR: Outstanding DB conversions found.
All converter entries are listed in G:\usr\sap\EHPI\abap\log\TBATGCHK.LOG.
Proceed as described in the upgrade manual and repeat this phase
until all converter entries are removed.
CONV ENTRY TBATG ENQU/***/E_AFCU 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/***/E_CONMS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/***/E_CUDESIGN 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/DSD/E_SL_SLD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/DSD/E_ST_TOUR 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/DSD/E_SV_LC 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/DSD/E_SV_VEHICL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/LSIERP/EPROCLOG 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQU/LSIERP/EREPTRUN 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEAPOUPD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEBNK_BTCH_HDR 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEBNK_BTCH_ITEM 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEBNK_RUL_CUS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEBNK_TIMEOUT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECACS_FFLTIT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECACS_METATYPMAP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_ACH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_ERH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_FAL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_IAL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_IPEV 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_IPIN 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_MJ 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_MP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_MPMT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLS_CCIHT_MPPL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_ACH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_ERH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_FAL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_IAL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_IPEV 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_IPIN 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_MJ 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_MP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_MPMT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCIHT_MPPL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECBLX_CCRCT_LOCK 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECCMHOLE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECKMLRUNPERIOD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECN_ACT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECOP_BUKRS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECOP_FIKRS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUECOP_WERKS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEDFKKDOC 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEDFKKWL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEDFKKWLI 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFAGL_MIG_DS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKEXC 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKEXCPAYKY 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKEXC_TMP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKIP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKMAKO2 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKNRRANGE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKNUMKR_DIS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKPOH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKPP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKKZK 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKK_BPCL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFKK_BPCL_ACT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFLFB1A 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFLFB1AS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFLFB1I 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFMALLOC 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFMHICTR 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFM_S200 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFM_S200_NEW 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFM_S300 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFREGUH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFSKB1 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFSKB1A 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFSKB1AS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFT001EX 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFT001SH 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEFVIBSEG 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC001A 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC001T 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC002A 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC002T 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC003A 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEF_FBICRC003T 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEG821SE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLFLEXE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLREFE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLT0E 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLT1E 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLT2E 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGGLTO3E 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGPPARE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGPPARS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGUMD1E 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEGUMD1S 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEHS_TDGEXCEPT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEIEQUI 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEIFLOT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEIMPLA 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEIMPOS 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEIQMEL 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJGEUWV 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDCOLLECTBAG 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDDEMAND 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDDEMANDCQP 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDDEMANDFIELD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDDEMANDN 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDFCASSIGNCON 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDFCHEAD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDFCITEM 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDFCLIKECON 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDFCVARIANT 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDISSUEDATE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDISSUERETPRO 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDORDERBFIELD 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDORDERBOOK 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDORDERBOOKRE 0CNVI 20091022DDIC
CONV ENTRY TBATG ENQUEJKSDUNSOLD 0CNVI 20091022DDIC
Can any one provide me solution how to solve it
Dear Experts,
,
We are currently perfoming a EHP7 upgrade from ECC6 ehp5 SP06. In the configuration Phase we are facing the conflict with GRCPINW, the
SUM is unable to keep the current version and proceed with the upgrade.The GRC Plugin(GRCPINW V1000_700 0012) is there in ECC6 EHP5 Server.We forgot to select the GRC addon While generating stack.xml for EHP7.
Kindly refer to the attached Screenshots for details and help us proceed with the appropriate option.Please help.
Regards
Maruthi v
Hi All,
We are updating our ERP landscape from ERP 6.0 EHP 4 SPS 13 to ERP 6.0 EHP 7 SPS 4. We are running on AIX/Oracle and using SUM10SP09_5-20006540.SAR. The update has been stuck in phase MAIN_SHDRUN/RUN_INDC_UPG for 10 hours. On the other 4 upgrades we have completed this phase ran for less than 2 minutes. I have searched SAP Notes, SCN and Google and did not find any relevant information (other posts for this phase were for different platforms). The only log in the SUM directory that is being updated is INDEXCHK.LOG, and it only indicates that the background job is still running. The background job log does not provide any information. There is also no information in ST22 and SM21.
Please advise on how to resolve this issue.
Thanks in advance for any assistance.
Best Regards,
Tommye Horton
Dear SAP USER and others
It is a strange error although SAP_BASIS 740 is updated from SP7 to SP8.
SAPup broke during phase ADDON_QCALC in module PREP_EXTENSION / Extension module
Error Message: gpv_ncvers_table not filled in function: R3upNcversTableFill
R3upNcversTableFill Take out and those who are known need to give me advice so that a module does not exist.
Dear Export ,
I in upgradeing our ERP system from EHP 4 to EHP7
I am stuck in configuration face Add-on selection
I select all options continue with unchecked
Kindly Guide me how to solve this issue
Regards
Hi experts,
I'm doing an EHP7 upgrade on our windows cluster system.
Currently on Phase MAIN_SHDRUN/ACT_UPG Pre Processing and this phase
is taking too much time.
I have checked the logs its not updating, I tried few oracle & memory related sap notes still same .
any suggestions
Dear Experts,
I am upgrading SAP from 701/EHP4 to 740/EHP7 during MAIN_SHDIMP/SUBMOD_SHDALIASCRE/SCEXEC_GRANT steps my use/sap partition 100% full I cut all log from /usr/sap/SUM/abap/log in move into USB drive then run SUM again but stack into this phase with following error
3 ETQ398 SQL: GRANT ALL ON SAPSR3."CAT_SVARS~" TO SAPSR3SHD
3 ETQ398 SQL: GRANT ALL ON SAPSR3."CC2S_CONSTRAINTS~" TO SAPSR3SHD
3 ETQ398 SQL: GRANT ALL ON SAPSR3."CC2TEST_T005S~" TO SAPSR3SHD
1 ETQ000 ==================================================
4 ETQ010 Date & Time: 20141024162727
1EETQ008 Error message: DBSL error 103 (db code 942):
ORA-00942: table or view does not exist
1EETQ003 exit code: "12"
4 ETQ399 Rollback.
4 EPU202XEND OF SECTION BEING ANALYZED END OF SCEXEC_GRANT =================================================
please help me to resolve this issue
Regards
Good day,
I have installed SAP ECC 6.0 EHP5 ready system and I want to upgrade to EHP6. I am using the guide "Update of SAP Systems Using Software Update Manager 1.0 SP04" for instructions on how to us SUM.
I come stuck in the section:
5.2Downloading the Software Update Manager
You can download the latest version of the Software Update Manager from SAP Service Marketplace at:http://service.sap.com/swdc Support Packages and Patches A – Z Index SSL ToolsetSL Toolset <release>Entry by ComponentSoftware Update Manager (SUM).
When I follow the path I find SPAM/SAINT UPDATE 702, please guide.
I expected to find a tool much the same as the previous sap ehpi.
hi
unfortunately we delete the system name and id from service market place, our system is erp ehp5 can any one guide me how add that
system in to market place system-data.
regards
vreddy
Hi all, I hope I have a easy one for you today. I am in process to upgrade my current SCM landscape 5.10 to the newest release of SCM 7 ehp2 and the SCM guy in my company raise a question about the comptability of this version with our current ERP landscape at the version EHP5.
He went over the spro => Integration With Other mySAP.com COmponents => Basis Settings => Sepcify SAP APO Release and the APO release 702 is not showing up but the version 701 (release 7.0 EHP 1) is available.
For me it's a question of SAP Notes installations to add this entry but I would like to validate with you guys if we need to install EHP6 to connect to the latest version of SCM 7 EHP2 or should I go with SCM EHP 1 ?
Thanks for help
Hi Gurus,
We are proceeding with the SAP EHP6 Upgrade on our test system <SID> from the level EHP2, Now we are struck up with an issue in the phase “PREP_INIT/CHECKPROF_INI” with error stating “Invalid replication configuration: Profile parameters DIR_CT_RUN and DIR_EXECUTABLE point to same location ‘/usr/sap/<SID>/SYS/exe/run’.
We have followed the sap note 1104735 and made sure to be the same values are available in both the instance and start profile.
We tried with the both the ways as follows:
DIR_CT_RUN $(DIR_EXE_ROOT)/run; /usr/sap/<SID>/SYS/exe/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe; /usr/sap/<SID>/DVEBMGS42/exe
Also verified at the operating system level as well when we changed the values. Please find the necessary attached document for your reference and as well the logs attached.
Your quick support will be greatly appreciated, as we are struck up with the upgrade and we cannot continue with production until unless we succeed in the HRX upgrade.
Regards,
hi
we want to uninstalling our erp ehp5 and database is mssql2008r2 , we want to tinstalling erpehp5 server , i am doing uninstalling my system with
swpm. please any one help to do this unistallation.
regards
vreddy
Dear Experts,
We have been working on customizing the SAP Hellenization (country Greece) solution for a Retail client. We have the PDF manual (CNTR_600) which details out the legal requirements/specifics.
However, the central change approval board (a central body of SMEs that approves the solution project team proposes) has some specific questions, answers to which are not available in the CNTR manual.
Could you please help us with the answers to the following questions (any SAP documentation confirming the requirements would be very useful):
a) Generating the legal document number is mandatory for all printed documents (delivery note/invoice). The number is generated by concatenating the KBS code, Series and a sequential number. Is it mandatory for the legal number to be a combination of these precise fields? What is the functionality associated with the 'series'? Can either KBS code/series be removed from this number?
b) The manual says that print task code is a required field for legal document number. Is a solution which generates the legal number without having print task code as a starting point (e.g. via Z-tables & condition record technique) an allowed option (in this option, the solution will be automated and the standard transactions for manually printing the documents will not be used).
c) We understand the functionality associated with the 'Last print date'. However, is there a legal requirement associated with? In other words, is there any implication if we don't have this functionality going forward?
d) As per my understanding, not all companies use the standard SAP solution (they copy the standard solution into custom namespace). Apart from the possibility of a undesired impact due to an SAP upgrade, is there any other reason the standard solution is not preferred?
Hello All,
I am applying EHP3 Upgrade for CRM system SUM has stuck at
This trouble ticket was created by SAPup on 20141107134145
-------------------------------------------------------------
SAPup broke during phase SCANDIR_EXTRACT in module PREP_INPUT / Parameter input
Error Message: No entry with key 'exe\xdnxdaapi.pdb'
-------------------------------------------------------------
We have this file on SUM exe drev on /abap/exe on SUM.
Any body have this isuue befor.
Thanks
Reza
Hi
Once we where told that SAP will release an EHP version in around once a year? EHP7 was in GA on 2013.08.13, so does anyone know the release plan for EHP8?
I can´t find anything in the PAM.
Hi all,
I am doing a CRM upgrade, but the SUM doesn't start.
I got the following error from SDTServer file.
<!--LOGHEADER[START]/-->
<!--HELP[Manual modification of the header may cause parsing problem!]/-->
<!--LOGGINGVERSION[2.0.7.1006]/-->
<!--NAME[S:\SUM\sdt\log\SDTServer.log]/-->
<!--PATTERN[SDTServer.log]/-->
<!--FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %m)]/-->
<!--ENCODING[UTF8]/-->
<!--LOGHEADER[END]/-->
Nov 17, 2014 3:29:17 PM [Info]: *************************************************
Nov 17, 2014 3:29:17 PM [Info]: Starting SL Controller listening on port 4241 ...
Nov 17, 2014 3:29:17 PM [Info]: Starting StorageService ...
Nov 17, 2014 3:29:17 PM [Info]: Initializing SecurityManager ...
Nov 17, 2014 3:29:19 PM [Info]: Server certificate fingerprint is 1E B6 6F B0 3D C6 D5 7E F4 C2 17 C0 E7 67 CB 9F
Nov 17, 2014 3:29:19 PM [Info]: Configuring HTTPManager ...
Nov 17, 2014 3:29:19 PM [Info]: Starting WebstartService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting RoleService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting AlertService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting NotesService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting ProcessService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting MIDService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting FileService ...
Nov 17, 2014 3:29:19 PM [Info]: LogService switched off.
Nov 17, 2014 3:29:19 PM [Info]: Starting MailService ...
Nov 17, 2014 3:29:19 PM [Info]: Starting services ...
Nov 17, 2014 3:29:19 PM [Info]: Starting service "UseCaseService" ...
Nov 17, 2014 3:29:20 PM [Info]: Starting MIDService ...
Nov 17, 2014 3:29:36 PM [Error]: Start of "UseCaseService" failed.
Nov 17, 2014 3:29:36 PM [Error]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of a null object loaded from local variable 'instProfileDir'
Nov 17, 2014 3:29:36 PM [Error]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of a null object loaded from local variable 'instProfileDir'
Nov 17, 2014 3:29:36 PM [Fatal]: Error during controller startup.
Nov 17, 2014 3:29:36 PM [Fatal]: SL Controller exiting.
Any idea about this error, we have java install in this server?
Thanks
Reza
I have installed the sap erp ehp6. I didn't install solution manager. who can help me to upgrade SAP_HR600 to SAP_HR605?
Hi All,
I am working generating stack xml file for upgrading EA-HR and SAP-HR components*Source EHP7 SR1 new inst) , while generating xml file i need to choose HRRENEWAL Addon .
I selected product version ERP6.0 and selected Add-on products , HRRENEWAL is not available there.
Recently applied note 1940845 , before applying this note i can able to find HRRENEWAL under enhancement packages but after implementing the note i can able to see only two options(stackfile and Add-on's)
Please help me to resolve the issue.